Welcome to Linqing Hairui Bearing Manufacturing Co., Ltd.
PRODUCT
CONTACT US
If you are interested in cooperation, please contact us immediately, we will give you feedback as soon as possible!
Mobile
Angular Contact Ball Bearings 5300E Series
Large Angular Contact Ball Bearing - Open, Double Row Two types of contact angles can be selected according to the magnitude of the axial load and moment load. Similar to single-row deep groove ball bearings, with a seal (2NS) and shield (ZZ) attached. Can be used on Blower, High-speed vacuum pump receiver, Supercharger and Two-wheeled vehicle transmission
More
Angular Contact Ball Bearings 3300 Series
3300 series double row angular contact ball bearings are non-separable and have a ball-loading notch on one side. It can bear large radial and axial bidirectional combined loads and moment loads mainly based on radial loads. It can limit the bidirectional axial displacement of the shaft or housing, and has better rigidity than single-row bearings. Bearings are available in open and sealed designs. Sealed bearings are maintenance-free and thus allow economical bearing arrangements.
More
Angular Contact Ball Bearings 3200 Series
Double row angular contact ball bearings correspond, in their design and operation, to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. They can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.
More
Angular Contact Ball Bearings 7200_7300BEP Series
Single row angular contact ball bearings consist of an outer ring, an inner ring, a row of steel balls and a cage. This type of bearing can bear radial load and axial load at the same time, and can also bear pure axial load, and can work at high speed. Single row angular contact ball bearings can only withstand axial loads in one direction. The "BEP" suffix is a nylon retainer, and the "BECBM" suffix is a copper retainer.
More
Angular Contact Ball Bearings 70000B Series
Angular contact bearing balls with α=40° (70000 B type), can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non- separable. Mainly used in a wide range of industries such as automobiles, electrical equipment, machine tools, and aircraft.
More
Angular Contact Ball Bearings 70000C Series
Angular contact bearing balls (type 70000 C) with α=15° can bear unidirectional axial load. When bearing pure radial load, bearings must be installed and used in pairs, because the action line of rolling element load and the action line of radial load are not in the same plane, resulting in internal separation force.
More
Angular Contact Ball Bearings 7000AC Series
Angular contact bearing balls (type 70000 AC) with α=25°, are inseparable and can only bear the axial force of one side, and the shoulder heights on both sides of the inner and outer rings are different, so more steel balls can be loaded to improve the bearing capacity. Mainly used in a wide range of industries such as automobiles, electrical equipment, machine tools, and aircraft.
More
