Welcome to Linqing Hairui Bearing Manufacturing Co., Ltd.
What are the structural characteristics of self-aligning ball bearings?
2024-02-27
Its characteristic is that the outer ring raceway is spherical and has self-aligning properties, which can compensate for errors caused by non-concentricity and shaft deflection, but the relative inclination of the inner and outer rings must not exceed 3 degrees.
What is the stress on tapered roller bearings?
2024-02-27
Since tapered roller bearings can only transmit axial loads in one direction, another tapered roller bearing installed symmetrically is required to transmit axial loads in the opposite direction.
What is the difference between thrust ball bearings and thrust roller bearings?
2024-02-27
The rolling elements of thrust roller bearings are in various forms such as cylindrical, conical or spherical roller types.
Characteristics of angular contact ball bearings
2024-02-27
The special feature of angular contact ball bearings is that there is a contact angle between the ring and the ball. The standard contact angles are 15°, 30° and 40°.
What is the function of bearings?
2024-02-27
Function: Bearings are an important part of modern mechanical equipment. Its main function is to support the mechanical rotating body, reduce the friction coefficient during movement, and ensure rotation accuracy.
What material is bearing steel?
2024-02-27
The hardness of bearing steel is relatively high, and this material is also relatively wear-resistant. Moreover, the chemical composition of bearing steel is very balanced, and the requirements for the distribution of various substances inside are very strict, especially the distribution of carbides.
